Hand it to chat, build it yourself, or start from the Library: pick whichever fits you to make your first workflow. All three produce the same kind of workflow, and you can edit it freely afterwards.
Three ways to start
Create in chat
Describe the task in the Home box, and the assistant works out the requirements in conversation and drafts the workflow. The easiest way if you're new.
Build it yourself
Pick a task type from Create workflow in the AI Workflows menu. Best when you want fine-grained control over the nodes.
Start from the Library
Add a workflow for a similar task to your workspace and adapt it to your documents.
Which one to choose
| Your situation | Recommended |
|---|---|
| New to Studio, want to see a result fast | Create in chat: attach a document while you explain, and it will draft the schema too |
| The rules are clear and you want to design the nodes and schema yourself | Build it yourself: add nodes and write the schema manually |
| Automating a common task like receipt processing or contract review | Start from the Library: begin from a validated template |
Building it yourself goes like this.
- In the AI Workflows menu in the sidebar, click Create workflow and the "What do you want to do with your documents?" dialog opens. Pick a task type such as From Scratch (an empty canvas), Turn documents into text, Organize documents by type, Extract key information, or Extract different data by document type, then click Create. The editor opens with the nodes that fit that type.
- When you upload documents, a dialog asks you to choose Auto setup or Manual setup. Auto setup analyzes the uploaded documents, configures the classification and extraction schemas for you, and asks whether to run once it's ready.
- If you chose Manual setup, configure the nodes and schema one by one as described in The workflow screen below.
Not sure what to build yet? Browsing the Library is a good start on its own. Seeing how finished document workflows are put together, along with their sample results, gives you a solid reference point.
Creating with chat
Chat on the Home screen is the conversational AI assistant built into Studio. You do not have to learn any settings screen first: describe your document task as if you were chatting, and it builds a workflow with the nodes and schema it needs. Edits and improvements afterwards also happen in conversation (Improving with the Chat tab).
Getting started
Describe the task in the Home box
Type what you want to automate into the "Ask a question, upload files, or describe a task" box in the middle of the Home screen.
For example: Pull the item, unit price, and total from the quote PDFs our vendors send, and lay them out in a table
Attach a sample document for better accuracy
Attach a real file to the box and the assistant will analyze its structure to build a more accurate schema. When it creates the new workflow, the files you uploaded in chat are listed. Choose the ones to include and click Create workflow with N files.
Answer the assistant's questions
The assistant asks about anything it is missing, usually as multiple choice. Once it has your document types, the fields to extract, and any decision criteria, it produces a draft workflow.
Check the workflow and run it
When generation finishes you land on the workflow screen, where you can review the nodes and schema. See Running a workflow for how to upload files and run.
Keep improving through conversation
If something is off after a run, open the Chat tab on the right edge of the workflow screen and ask for changes there. Adding schema fields, adjusting classification rules, and diagnosing odd results can all be done in conversation. See Improving with the Chat tab for details.
What chat is and isn't good at
| Good at | Out of scope |
|---|---|
| Turning a task description into node structure and schema design | Anything that would need a capability Studio doesn't have |
| Analyzing an attached document to suggest fields | Guaranteeing document processing results without running a workflow |
| Editing the settings of an existing workflow (Improving with the Chat tab) | |
| Answering questions about Studio features and usage | |
| Researching up-to-date information with web search: the Web search card on Home (availability depends on your environment) |
For out-of-scope requests, it suggests what it can do instead.
How to explain it well: write one line each for ① the document type (quote, resume, and so on), ② the fields you want, and ③ the criteria, if a judgment is involved. The more specific you are, the better the first draft.
Use the model dropdown in the chat box to pick the model that answers. The default, Auto, picks a model that fits the request, so you can usually leave it as is.
Conversations in chat are saved under Recent chats in the sidebar, so you can always pick them back up; start a new chat for a different topic. Chat availability may differ depending on your environment (region). If chat isn't available where you are, start by building it yourself or from the Library.
Recurring requests as scheduled tasks
If you keep making the same request in chat, set up a scheduled task on an AI Coworker. Scheduled tasks are created on AI Coworkers, so you first need to hire a coworker. The task runs automatically at the time you set, and the result arrives as a conversation. How to create one and set run permissions is covered in Scheduled tasks.
"With chat you just describe the job. Name the document type, the fields, and the criteria, and the assistant does the node design."
The workflow screen
The workflow screen is where you connect nodes into a pipeline and review the results. You switch between nodes in the top bar, and the area below is split into three areas: cases · document · config and results.
The three areas
- Case panel: The list of uploaded cases. A case is one unit of processing: it can be a single file or a bundle of files. Use the checkboxes to pick what to run, and the controls at the top to switch between table, detail, and monitoring views.
- Document viewer: A preview of the original pages of the selected case, so you can compare the source with the extracted values side by side while reviewing.
- Config and results panel: Click a node (Parse · Classify · Extract · Instruct and so on) in the top node bar to see that node's run results here, as a preview or as JSON. To change a node's settings, open the config panel with the Edit workflow button (see below).
Adding and editing nodes: the config panel
Adding, removing, and editing nodes all happens in the config panel (Config; screen title: Workflow editor). Open and close it with the ✨ Edit workflow button on the workflow screen or the A key. Despite the similar name, it is a different screen from ③ the config and results panel, where you check results.
Open the config panel
Click the ✨ Edit workflow button at the right of the node bar, or press A. Press it again or press Esc to close.
Add a node
In the Add node bar at the top of the panel, click the name of the node you want and it is added to the canvas. The nodes are split into three groups: Classify · Extract, Instruct · Match · Validate, and Merge.
- Adding more than one: Extract, Instruct, Match, and Validate can be added more than once (two Instruct nodes, for example). A workflow can have only one Classify, so clicking Classify when one already exists adds a document type row to it.
- Picking a type as you add: Click the arrow (▾) next to Classify, Extract, or Instruct to pick the type and add it right away. Classify offers Classify only / Classify with split, Extract offers Extract information / Mask document (Mask), and Instruct offers Instruct only / Instruct with decisions.
- What changes along with it: Clicking Merge also turns on Split in Classify (Merge), and if you add Match when there is no Extract before it, an Extract is added along with it (Match).
- Continuing from the End marker: Click the End marker at the end of a flow on the canvas and choose the next step, and the node is added already connected.
Import and Export are not in the Add node bar: you add and set them on the Start and End markers at either end of the canvas (Export and Import).
Connect and branch nodes
Join the nodes you add with connectors. On the canvas, drag the connection point on a node's edge and drop it on the
next node to connect them; select a connector and use Delete connection to remove it. Branching by document type after
Classify works the same way. Each document type has its own connection point, so dragging the Domestic receipt point to
Extract-1 and the Overseas receipt point to Extract-2 creates a path per document type. A single branch can only connect
to one next step.
Parse is included by default
In a workflow that starts from manual input, Parse is included as the starting node and cannot be removed. The screen labels it "This step is included by default and cannot be removed." If you switch the input method on the Start marker to Collection import, the workflow brings in results that have already been recognized, so it starts without Parse (Export and Import).
Configure the node
Click a node on the canvas to fill in its settings. Each node's options are covered in Nodes.
Every time you change a config and run, Studio records a new config version, so you can experiment safely. See Versions and deployment.
Uploading cases
| Item | Details |
|---|---|
| How to upload | The upload button next to Run at the top right, or drag and drop. From the menu, choose Upload files from your device or a connector you have connected |
| Upload files | Each selected file becomes its own case: 10 files means 10 cases and 10 results |
| Upload as combined | Turn on the Upload as combined toggle under the upload menu, and the selected files are bundled into one case and processed together, producing a single result. For example, a contract plus three attachments uploaded together are reviewed as one item |
| Auto-run | Turn on the Auto-run on upload toggle that appears when you click the upload button, and each case runs as soon as it finishes uploading. Handy for repetitive batches |
| Organizing | Cases can be sorted by date, name, or document type, and you can select several to delete in bulk (deletion can't be undone) |
| Limits | Up to 500 MB and 1,000 pages per file. See Supported file formats |
Stuck while building manually? Hand it to chat. Open the Chat tab on the right edge of the workflow screen and
chat appears as a side panel. It is the same conversational assistant that built your workflow above. Ask something like
add an issue date field to the schema and it will keep editing the workflow you're working on in conversation
(Improving with the Chat tab).
Mixing manual configuration and chat edits is perfectly fine.
Renaming: Double-click the workflow name in the header to edit it. You can also rename it with the edit name menu in the workflow list.
Ten-minute walkthrough: your first workflow
Run through it once from start to finish with what you've learned so far.
- Describe your task in the Home box to get a draft workflow (Creating with chat). If you'd rather build it yourself, start with Create workflow (Three ways to start).
- Upload one document on the workflow screen (see Uploading cases above).
- Select the case and click Run (Running a workflow).
- Click a node in the top node bar to check the results, and double-click any wrong value to correct it (Reading the results).
- If you like the results, upload more cases and run again; if not, ask the Chat tab to improve it (Improving with the Chat tab).
"The editor's basic path is upload cases → add and connect nodes → configure nodes → run. Whenever you get stuck, just tell the Chat tab."